Primary removal tool

I have a primary clutch removal tool left over from my old 800S. Can anybody tell me whether or not it will work on a 2015 XP1k before I sell it? Thanks Utah RZR...
Taking apart cv axle

Taking apart cv axle

Looking to change the boot for the front upper CV. Looking at this, everything in my mechanical experience tells me there should be a snap ring or circlip on this shaft but I cant seem to find one. I’ve read people talk about using a hammer and knocking a joint...

Breaking Belts VERY Quickly

I’ve got a 2015 RZR S 900 that I can’t seem to keep the drive belt alive on. The bike has around 650 miles on it, I bought it new from my local dealership. At around 500 miles, I threw a lot of parts at in including a BMP stage 3 clutch kit (which included...

2008 RZR Transmission Upgrade

Hello. Can anybody tell me what years of transmisisons are compatible with my 2008 RZR 800 EFI. Will a 2012 RZR 800 transmission work? Mine was doing the popping out of gear thing and then the rear case half split open? Thanks. Utah RZR...
Inner Cv axle rubbing  2014 1000 xp

Inner Cv axle rubbing 2014 1000 xp

So my driver and passenger inner CV axle.is rubbing on the frame and chafing its self to bits what would cause this. I also have rhino axels tAttachment 559432Attachment 559434 Attached Thumbnails     Utah RZR...

Cam Sprocket Bolts – XP 900

I searched the forum (I really did!) but couldn’t find a clear answer. I’m finishing up a valve adjustment on my 2012 XP 900, and I’m ready to put the cam sprockets back on. The manual states that new bolts should be used with red loctite. Are these...