No message available, Or messages are expired already.

Was driving my 2011 xp 900 in Pismo and was on the gas hard when the coolant hose below the header on the front side of the engine blew. I immediately stopped and shut it down (I thought I was on fire). I replaced the hose filled the system with coolant, then removed the upper hose the radiator topped it off, then pulled the small vent hose at the top of the radiator off and topped it off again. When I fire it up the engine gets to 200 degrees and the radiator fan kicks on but the radiator and hoses that go to the radiator are cold. The engine temp keeps climbing and I have to shut it down. I’ve tried 3 times and it’s the same. What am I doing wrong? Thanks.

Utah RZR Rentals

whence