Ok guys I really could use some help here I have a 636 code for the cps. I have tested the cps at the plug per the Polaris service manuals and on an ohm meter it tests good I think it was 568 on the outer pins I have the same reading from the sensor all the way at the ecu plug.That should eliminate the harness. I’m at a loss. Is it the ecu? Is there something I’m missing please help I’m at a loss I should add that the light comes on immediately as soon as the key is on the on position it trips the light before it even cranks that would eliminate anything mechanical like flywheel damage. And I have pulled the cps to inspect for damage to the cps or flywheel they both to be in perfect condition

Utah RZR Rentals

whence