No message available, Or messages are expired already.

Greetings All,
Thought I would ask a question too see what you folks have to say.
Just picked up my new 2019 RZR XP1000 Ride Command on Jan 10.
I have about 40 miles on it from riding in the yard and the neighborhood.

Love the machine, initially seemed fine, but at about 25 miles started noticing a noise at about 30MPH

Slightly grinding/whining noise that pulsates about every 3 seconds gets louder and softer, letting off the gas to about 15mph sound goes down about 50% but still noticeable. Putting it in 4×4 it goes down slightly but still happens.

In Neutral.
I jacked up the front of the machine and spun both front wheels by hand, no noticeable play or noise front seemed fine.
Jacked up the back off the ground, spun the wheels and it appears tranny makes a clunking/clacking noise every couple of tire rotations.
Should the back wheels off the ground spinning in Neutral make any noise?
It was about 30 degrees here so I dont think it overheated any.

Any ideas planning to contact my dealer on Monday.

Not happy with a 4 day old machine $20k spent and only 40 miles.

Utah RZR Rentals

whence