during my ride this weekend at the dunes, my rzr was spiking in temps and the voltage dropped to 9.1v. I figured the battery was bad since it was new from 2016 so I replaced it. All seemed fine until about 30 minutes later when it acted up with the same symptoms. After the second time I new something was wrong. I started to dig deeper into the issue and found out that the plugs at the regulator as well as the plug at the cdi on the motor were melted internally at the pins and now it wont even start, just clicks over. Can anyone lead me in the right direction as to what happened? I have a 2 rigid pods. 1 rigid 6″ light bar, gps, intercom and a parker pumper. thank you

Utah RZR Rentals